Release Agents - Water Based
No.: ACS-W302
Before molding synthetic resins and synthetic rubbers, the processing aids are applied to the mold to prevent synthetic resins and synthetic rubbers from sticking to the mold and making it easier to remove from the mold, leaving no residue on the mold surface and speeding up production. Release agents can also be divided into fluorine-based release agents [water-based] and silicone-based release agents [oil-based
5-gallon (20L): Each barrel is estimated to cover 100m², about 30 pings, and weighs about 18kg
50-gallon (200L): Each barrel is estimated to cover 1000 m², about 300 pings, and weighs about 184kg
★ Resistant to oil residue and reduce mold cleaning costs.
★ The thickness of the release film formed by fluorine is below 1μm, which will not affect the microstructure of the precision finished product and reduce the defect rate
★ Low surface tension is about 11mN/m
★ Good cleanliness and bonding with the metal mold, good demolding effect
★ Will not transfer to finished products, suitable for secondary processing
Applicable to steel molds, aluminum alloy molds, plain concrete molds, general wooden molds, plastic molds, plastic steel molds, cardboard molds, etc. and system pre-casting.